ClawHub on OpenClaw Not Working: How to Fix It, Install & Use Properly
Are you trying to install a skill from ClawHub on OpenClaw, but nothing happens? Does the installation fail, or does OpenClaw refuse to recognize a skill even after you download it? You’re not alone. These problems can happen when the OpenClaw version is outdated, the installation command is incorrect, the skill is incompatible, or the required files are missing.
ClawHub is a public registry where OpenClaw users can discover and install community-created skills and plugins. These skills help OpenClaw perform additional tasks and connect with different services.
However, one important thing to understand is that ClawHub and OpenClaw use different commands for different purposes. You generally use OpenClaw’s own commands to search for and install skills, while the separate ClawHub CLI is useful for account authentication, publishing, and registry management.
In this guide, we’ll explain why ClawHub might not work with OpenClaw and show you how to troubleshoot installation problems.
ClawHub on OpenClaw Not Working

If ClawHub is not working on OpenClaw, check your OpenClaw version, verify your installation commands, update the required CLI tools, and confirm that the selected skill is compatible. You should also check your internet connection, workspace location, and ClawHub service status. For installing a skill, use openclaw skills search and openclaw skills install rather than assuming you need the standalone ClawHub CLI.
Let’s go through the most effective troubleshooting methods.
1: Check Whether OpenClaw Is Installed Correctly
Before troubleshooting ClawHub, make sure OpenClaw itself is installed and working properly.
If OpenClaw is not installed correctly, its commands may fail to communicate with ClawHub. Start by opening your terminal or command prompt.
On Windows, open the Start Menu, search for PowerShell, and launch it.
Type the following command:
openclaw –version
Press Enter to check the installed version.
If the terminal displays a version number, OpenClaw is available. If you see an error such as openclaw is not recognized, your installation or PATH configuration may be incorrect.
In that situation, check the official OpenClaw installation instructions and complete the installation again if necessary.
You can also run:
openclaw –help
This command displays available OpenClaw commands and helps confirm that the CLI is responding.
2: Update OpenClaw to the Latest Compatible Version
An outdated OpenClaw installation can cause problems with ClawHub searches, skill installations, and plugin compatibility.
OpenClaw’s commands and ClawHub integration can change between releases. That’s why updating your installation is a useful troubleshooting step.
First, check your current version:
openclaw –version
Next, follow the upgrade instructions for your original installation method. For example, if you installed OpenClaw through its official installer or package manager, use the corresponding upgrade procedure.
After updating, close and reopen your terminal.
Run the version command again to confirm that the update was successful.
Important: Don’t randomly reinstall OpenClaw or delete its configuration folders. Those folders may contain your workspace, agent settings, and other important information.
3: Use the Correct Command to Search ClawHub
One common reason ClawHub doesn’t work is using the wrong command.
You don’t always need to install the standalone ClawHub CLI to search for or install OpenClaw skills.
Open PowerShell or your terminal and run:
openclaw skills search “calendar”
This searches ClawHub for skills related to calendars.
You can replace calendar with the name of the skill or functionality you’re looking for.
For example:
openclaw skills search “weather”
If search results appear, the connection is working.
If nothing appears, check your internet connection, spelling, and whether the skill is publicly available.
4: Install the Required ClawHub CLI
Although OpenClaw can handle regular skill installation, the standalone ClawHub CLI is useful for registry-specific operations.
For example, you may need it to sign in, publish your own skills, or manage your published listings.
First, make sure Node.js and npm are installed.
Check npm by running:
npm –version
If npm is available, install ClawHub using:
npm install -g clawhub
Alternatively, if you use pnpm, run:
pnpm add -g clawhub
After installation, verify that ClawHub is working:
clawhub –help
If the command isn’t recognized, restart your terminal. If the problem continues, check whether npm’s global installation directory is included in your system PATH.
5: Sign In to Your ClawHub Account
Some ClawHub operations require authentication, especially publishing and managing your own listings.
To sign in, run:
clawhub login
The CLI will display a verification URL and a one-time code.
Open the URL in your browser, sign in with GitHub if necessary, enter the displayed code, and approve the authorization request.
Once authorization is complete, return to your terminal.
Now run:
clawhub whoami
If your account information appears, authentication is working.
If you receive an Unauthorized (401) error, sign in again. Also check whether an API token has been revoked or whether you’re using an incorrect configuration file.
6: Check the Skill Name and Installation Command
Another common issue is entering an incorrect skill name.
ClawHub skills use an owner-qualified name, such as:
@owner/skill-name
You should copy the exact name from the skill’s ClawHub listing.
For example, the official documentation demonstrates this installation command:
openclaw skills install @openclaw/demo
Replace the example name with the actual skill you want to install.
Wait until the terminal finishes the installation process. Don’t close the terminal while files are downloading or being extracted.
If the installation fails, read the complete error message. It may identify a missing dependency, compatibility problem, or security restriction.
7: Verify That the Skill Is Installed
Installing a skill doesn’t always mean it is immediately available to your agent.
You should confirm that OpenClaw recognizes it.
Run:
openclaw skills list
This command displays the installed skills.
You can also check whether the skill is eligible for use:
openclaw skills list –eligible
If your skill appears in the installed list but isn’t eligible, review its requirements and configuration.
You can also inspect a particular skill:
openclaw skills info skill-name
Replace skill-name with the actual skill name.
These commands help identify whether the problem is related to installation or skill availability.
8: Check Internet Connection and ClawHub Rate Limits
ClawHub needs an internet connection to search its registry and download packages.
If your connection is unstable, searches may time out or installations may stop unexpectedly.
Open your browser and visit the official ClawHub website:
ClawHub Official Website.
If the website loads, try searching again from your terminal.
If you’re using a corporate network, VPN, or proxy, check whether it blocks registry requests.
ClawHub also applies rate limits. If you receive a 429 Rate Limit Exceeded error, wait for the retry period indicated in the response before trying again.
Repeatedly running the same command won’t necessarily solve a rate-limit problem.
9: Check Skill Compatibility and Security Warnings
Sometimes ClawHub works correctly, but a particular skill cannot be installed.
This can happen because the skill is incompatible with your OpenClaw version, has missing dependencies, or has been held for a security review.
Before installing an unfamiliar skill, inspect its description, publisher, source files, version information, and security scan status.
Pay particular attention to requested permissions, environment variables, and external commands.
Never ignore a security warning simply to complete an installation. A community-created skill may contain instructions or code that you don’t want running on your computer.
You can also use the verification command:
openclaw skills verify @owner/skill-name
Replace the example with the correct owner and skill name.
This helps you check the registry’s release information and trust status.
How to Install & Use ClawHub on OpenClaw Properly? Step by Step
Now that you’ve checked the common problems, let’s go through the complete installation and usage process.
Step 1: Open the ClawHub Website
Open your preferred web browser and visit clawhub.ai.
You’ll find a collection of community-created skills and plugins. Use the search feature to find something that matches your requirements.
Click the skill you want to install and review its description, publisher, available versions, and security information.
Copy its exact owner and skill name.
Step 2: Open Your OpenClaw Terminal
Launch PowerShell, Command Prompt, or your preferred terminal.
Make sure you’re working with the correct OpenClaw installation and workspace.
Run:
openclaw skills list
This helps you check which skills are already installed.
Step 3: Search for Your Required Skill
Use the following command:
openclaw skills search “your skill name”
For example:
openclaw skills search “productivity”
Review the available results and select the correct skill.
Step 4: Install the Skill
Once you’ve found the skill, install it using its exact owner-qualified name.
For example:
openclaw skills install @openclaw/demo
Replace the example with your selected skill.
Wait for the installation to finish. If OpenClaw displays a security warning, review it before proceeding.
Step 5: Confirm the Installation
Run:
openclaw skills list
Find your newly installed skill in the results.
If it appears, OpenClaw has registered the installation.
You can also run:
openclaw skills info skill-name
This provides additional information about the installed skill.
Step 6: Start Using Your Installed Skill
Open your OpenClaw interface and start a new conversation with your agent.
Give it a request related to the functionality provided by your installed skill.
For example, if you installed a calendar-related skill, you could ask your agent to help organize a schedule.
Remember that installing a skill doesn’t automatically configure every external service. Some skills require API credentials, environment variables, or additional permissions before they can perform their intended tasks.
Follow the instructions provided in the skill’s SKILL.md file.
Step 7: Update Your Installed Skills
Outdated skills can sometimes cause compatibility problems.
To update all ClawHub-tracked skills, run:
openclaw skills update –all
If you’re installing plugins instead of skills, use the plugin commands:
openclaw plugins search “calendar”
Install a plugin using:
openclaw plugins install clawhub:package-name
The explicit clawhub: prefix is particularly important for compatibility with released OpenClaw versions that don’t automatically select ClawHub as the package source.
Update installed plugins using:
openclaw plugins update –all
Important: Skills and plugins are different. Skills provide instructions and supporting files, while plugins can add executable integrations and functionality. Use the appropriate installation command for each.
Faqs
1. Why is ClawHub not working on OpenClaw?
This can happen because of outdated OpenClaw versions, incorrect commands, internet connection problems, rate limits, or incompatible skills. Check the terminal error message to identify the actual cause.
2. Do I need to install ClawHub separately?
Not necessarily. OpenClaw supports searching and installing ClawHub skills through its native CLI. The standalone ClawHub CLI is mainly useful for authentication, publishing, and registry management.
3. Why is my ClawHub skill not showing in OpenClaw?
Check whether the installation completed successfully and whether you’re using the correct workspace. Run openclaw skills list to inspect installed skills.
4. How do I fix the ClawHub 401 error?
A 401 error generally indicates an authentication problem. Run clawhub login again and verify your account using clawhub whoami.
5. How do I fix the ClawHub 429 error?
A 429 error indicates that you’ve exceeded a request limit. Wait for the retry period specified in the error response before trying again.
6. Can I install ClawHub skills on Windows 11?
Yes. You can use OpenClaw’s CLI from PowerShell or another supported terminal environment. Make sure OpenClaw and its required dependencies are installed correctly.
7. How do I update all ClawHub skills?
Run the following command:
openclaw skills update –all
It updates eligible ClawHub-tracked skills.
Summary
ClawHub makes it easier to discover and extend OpenClaw’s capabilities through community-created skills and plugins. However, incorrect commands, outdated installations, authentication problems, and compatibility issues can prevent it from working properly.
Start by checking your OpenClaw installation, update it, and use the correct commands to search and install skills.
Verify the installation afterward and review security warnings before allowing a community-created skill to run.
