Fix CHKDSK Is Not Available for RAW Drives in Windows 11/10
Have you ever tried to scan your hard drive or USB drive using the CHKDSK command, only to receive the error message “CHKDSK is not available for RAW drives”? This error can be frustrating, especially when you cannot access important files stored on your storage device.
The error usually appears when Windows detects a drive as a RAW file system instead of recognizing it as NTFS, FAT32, or exFAT. This means Windows cannot properly identify the file system on that drive. As a result, the CHKDSK utility cannot perform its regular file system checks.
There are several reasons why a drive may become RAW. These include a corrupted file system, damaged partition information, an interrupted formatting process, unsafe device removal, or physical drive problems.
In this guide, we’ll explain how to fix the CHKDSK is not available for RAW drives error in Windows 11 and Windows 10.
Fix CHKDSK Is Not Available for RAW Drives

To fix the CHKDSK is not available for RAW drives error, first check the drive connection and confirm its file system in Disk Management. If you need the stored files, recover them before attempting repairs or formatting. You can then try assigning a drive letter, repairing partition information with suitable recovery software, or formatting the drive to NTFS or exFAT if you no longer need its existing data.
Important: Do not format the drive or run commands that modify its partitions if you need to recover important files.
Formatting can make data recovery more difficult.
Step 1: Check the Drive Connection
Before changing any Windows settings, make sure the storage device is connected properly. Sometimes, a loose USB connection, faulty cable, or damaged USB port can prevent Windows from reading a drive correctly.
If you’re using an external hard drive, USB flash drive, or memory card, disconnect it safely and reconnect it.
Open File Explorer by pressing Windows + E and check whether your drive appears under This PC.
If it is an external drive, try connecting it to another USB port. You can also test it on another computer to determine whether the problem is related to Windows or the storage device.
If the drive makes unusual clicking noises, repeatedly disconnects, or becomes extremely slow, stop using it. These symptoms can indicate hardware failure. Consider professional data recovery if the files are important.
Step 2: Check the File System in Disk Management
Windows Disk Management lets you check the status, partition, and file system of your storage devices.
To check whether your drive is actually showing as RAW, follow these instructions.
Step 1: Press Windows + X on your keyboard.
Step 2: Select Disk Management from the menu.
Step 3: Wait for the Disk Management window to load. You’ll see a list of available storage devices and their partitions.
Step 4: Locate the affected drive and check its File System column.
If the drive displays RAW instead of NTFS, FAT32, or exFAT, Windows cannot recognize its existing file system.
Also, check whether the partition is marked as Healthy, Unallocated, or Not Initialized.
Do not select Initialize Disk, Delete Volume, or Format if you need the existing files. These actions can make recovery more difficult.
Step 3: Recover Important Files Before Repairing the Drive
If your RAW drive contains important documents, photos, videos, or other personal files, prioritize data recovery.
You can use reputable data recovery software that supports RAW partitions. Some tools can scan the drive and identify files even when Windows cannot access its file system.
Another option is Windows File Recovery, Microsoft’s command-line recovery application. However, its supported recovery scenarios and file systems have limitations, so it may not work with every RAW partition.
If you use recovery software, follow these precautions:
First, install the recovery application on a different drive. Do not install it on the affected RAW partition.
Second, scan the RAW drive without formatting it.
Third, select the files you want to recover and save them to another healthy storage device.
Finally, open some recovered files to confirm that they work properly.
If the drive is physically failing, avoid repeated scans. A professional recovery service may be a safer option.
Step 4: Assign a New Drive Letter
Sometimes, Windows detects a storage partition but does not assign it a drive letter correctly. You can check this through Disk Management.
However, assigning a drive letter will not repair a genuinely corrupted RAW file system. Try this method only when the partition has a recognizable file system but is missing its drive letter.
Step 1: Open Disk Management using Windows + X.
Step 2: Locate the affected partition.
Step 3: Right-click the partition and select Change Drive Letter and Paths.
Step 4: Click Add if no drive letter is assigned.
Step 5: Select an available drive letter from the dropdown menu.
Step 6: Click OK to save your changes.
Now, open File Explorer and check whether Windows can access the drive.
If the partition still appears as RAW, move to the next method rather than repeatedly changing its drive letter.
Step 5: Try Partition Recovery Software
If your drive contains important data and Windows still identifies it as RAW, partition recovery software may help.
A tool such as TestDisk can analyze partition structures and attempt to recover lost or damaged partitions.
Before using it, make sure you understand the difference between analyzing a partition and writing changes to the disk.
Step 1: Download TestDisk from its official website on a working drive.
Step 2: Extract the downloaded archive.
Step 3: Run the program with administrator privileges.
Step 4: Select the affected physical disk carefully.
Step 5: Choose the partition table type when prompted. TestDisk often detects the appropriate type automatically.
Step 6: Select Analyse to search for existing and lost partitions.
Step 7: Review the results carefully. If the expected partition appears, you may be able to browse its files using TestDisk.
Do not select the Write option unless you understand the consequences and have secured a backup or disk image. Incorrect partition changes can make the situation worse.
If you are unsure, get help from someone experienced with partition recovery.
Step 6: Format the RAW Drive Using Disk Management
(Data loss warning)
If you have recovered your files or don’t need anything stored on the affected drive, formatting it is one way to restore normal access.
Formatting creates a new file system that Windows can recognize.
Step 1: Press Windows + X and select Disk Management.
Step 2: Locate the RAW partition.
Step 3: Right-click the partition and select Format.
Step 4: Enter a suitable volume label, such as External Drive.
Step 5: Select NTFS for a Windows-only hard drive or exFAT if you need broader compatibility with different devices.
Step 6: Leave the allocation unit size at its default setting.
Step 7: Confirm the formatting operation if you’re certain that the existing data is no longer needed.
Wait for Windows to complete the process.
Once formatting finishes, the drive should display its new file system in Disk Management. Open File Explorer and check whether you can access it.
Remember that formatting does not repair physical hardware damage.
Step 7: Format the Drive Using Command Prompt
If Disk Management cannot format the RAW partition, you can try the Command Prompt method.
Important: The following procedure erases the selected disk. Double-check the disk number before continuing. Never use it on a drive containing files you still need.
Step 1: Open the Start menu and search for Command Prompt.
Step 2: Select Run as administrator.
Step 3: Enter the following command and press Enter:
diskpart
Step 4: Type this command to display connected disks:
list disk
Step 5: Identify your affected drive by checking its storage capacity. Be extremely careful when selecting the disk.
Step 6: Replace X with the correct disk number:
select disk X
Step 7: Confirm that you selected the correct disk:
detail disk
Step 8: If you have confirmed that this is the correct disk and all required files are backed up, enter:
clean
This removes the disk’s partition information.
Step 9: Create a new partition:
create partition primary
Step 10: Format the new partition as NTFS:
format fs=ntfs quick
Step 11: Assign a drive letter:
assign
Step 12: Type exit to close DiskPart, then type exit again to close Command Prompt.
Open File Explorer and check whether your drive is accessible.
If DiskPart reports an I/O error or the drive repeatedly disconnects, suspect a hardware problem rather than continuing to format it.
Step 8: Run CHKDSK After Restoring the File System
After successfully recovering your data and formatting or repairing the partition, you can use CHKDSK to check the drive for file system errors.
Remember, CHKDSK cannot repair a drive that Windows still identifies as RAW. It works with supported, recognizable file systems.
Follow these steps:
Step 1: Open Command Prompt as an administrator.
Step 2: Enter the following command, replacing D with your actual drive letter:
chkdsk D: /f
Step 3: Press Enter and allow Windows to scan the drive.
Step 4: If Windows finds logical file system errors, the /f parameter allows CHKDSK to attempt repairs.
Step 5: Wait until the scan finishes. Do not disconnect the drive while the operation is running.
If you want CHKDSK to check for bad sectors and attempt to recover readable information, you can use:
chkdsk D: /r
This operation can take considerably longer, especially on large hard drives.
Faqs
1. Why does CHKDSK say it is not available for RAW drives?
This error appears when Windows cannot recognize the file system on a storage device. CHKDSK requires a supported file system to perform its checks, so it cannot normally repair a RAW partition.
2. Can I convert a RAW drive to NTFS without formatting?
There is no standard Windows command that safely converts a RAW partition directly to NTFS. If you need your files, try recovering them first. After securing your data, you can format the partition as NTFS.
3. Will formatting a RAW drive delete my files?
Yes. Formatting can make existing files inaccessible and may overwrite important file system information. Avoid formatting until you have recovered everything you need.
4. Can I fix a RAW USB drive without losing data?
You may be able to recover your files using partition recovery or data recovery software. However, successful recovery depends on the extent of file system corruption and the physical condition of the USB drive.
5. Does CHKDSK work on external hard drives?
Yes. CHKDSK can check supported file systems on external hard drives, USB drives, and other locally connected storage devices. However, it cannot perform its normal repair operations when Windows identifies the partition as RAW.
6. Why does my hard drive suddenly become RAW?
A hard drive can become RAW because of file system corruption, interrupted formatting, damaged partition information, unsafe removal, or hardware failure. Identifying the actual cause can help prevent the problem from happening again.
7. Should I use DiskPart to fix a RAW drive?
DiskPart can remove existing partition information and create a new partition, but commands such as clean erase important disk structures. Use it only when you no longer need the existing data or have successfully recovered it.
Summary
The CHKDSK is not available for RAW drives error usually means Windows cannot recognize the file system on your storage device. Since CHKDSK requires a recognizable file system, running additional CHKDSK commands will not solve the underlying RAW partition problem.
Start by checking the drive connection and its status in Disk Management. If important files are stored on the drive, recover them before attempting repairs or formatting.
If you don’t need the existing data, formatting the partition through Disk Management or DiskPart can restore its usability.
Finally, once Windows recognizes the drive as NTFS or another supported file system, run CHKDSK to check for file system errors.
