How to Set Up a Microsoft Surface Business 12 for PXE Boot
Setting up a Microsoft Surface device for PXE boot is useful when you want to install Windows, deploy an operating system, troubleshoot startup problems, or manage multiple computers over a company network. Instead of installing Windows from a USB flash drive, PXE boot lets your Surface download the necessary boot files from a network server.
If you’re using a Microsoft Surface Pro for Business 12-inch, you can configure its UEFI firmware to start from a supported Ethernet connection. However, you’ll need a compatible Ethernet adapter or docking station, a properly configured network, and access to a PXE deployment server.
Don’t worry if you’ve never configured PXE boot before.
In this guide, I am going to explain everything step by step, including how to access Surface UEFI, enable network boot, connect your device, and start the deployment process.
How to Set Up a Microsoft Surface Business 12 for PXE Boot

To set up a Microsoft Surface Pro for Business 12-inch for PXE boot, connect a supported Ethernet adapter or docking station, shut down the device, and enter UEFI by holding Volume Up while pressing Power. Open Boot Configuration, enable PXE Network and Alternate Boot Sequence, and select PXE Network to boot immediately.
Connect to a properly configured PXE server to begin network deployment.
Step 1: Check the Requirements for PXE Boot
Before changing any firmware settings, make sure you have everything required to start your Surface from the network.
First, you’ll need your Microsoft Surface Pro for Business 12-inch. Make sure the device has the latest available firmware and driver updates installed.
Next, arrange a compatible Ethernet adapter or docking station. A regular USB-C Ethernet adapter might work inside Windows but may not support PXE boot at the firmware level.
Microsoft lists supported networking accessories, including the Surface USB-C to Ethernet and USB 3.0 Adapter, Microsoft USB-C Travel Hub, Surface Dock 2, Surface USB4 Dock, and Surface Thunderbolt 4 Dock.
You’ll also need a working Ethernet cable, an available network connection, and a PXE-enabled deployment server.
Your organization’s IT administrator should configure the server using a deployment solution such as Windows Deployment Services (WDS) or Microsoft Configuration Manager.
Step 2: Connect Your Surface to a Wired Network
PXE boot requires a wired network connection through a supported Ethernet adapter or docking station.
Start by connecting your compatible Ethernet adapter to the Surface’s USB-C port. If you’re using a docking station, connect the Surface to the dock according to its instructions.
Now, plug one end of your Ethernet cable into the adapter or docking station and the other end into an available network port.
Make sure the Ethernet connection is active. Check the adapter’s indicator lights, if available, to confirm that the cable is connected.
Remember that connecting to Wi-Fi isn’t a substitute for this process. PXE boot requires a supported wired Ethernet connection that the Surface firmware can recognize before Windows starts.
Step 3: Enter the Surface UEFI Settings
Now that your network connection is ready, you need to access the Surface UEFI settings.
UEFI is the firmware interface that controls how your Surface starts and which devices it can boot from.
First, completely shut down your Surface. Wait approximately 10 seconds to make sure it’s powered off.
Next, press and hold the Volume Up button.
While continuing to hold Volume Up, press and release the Power button.
Keep holding Volume Up until the Microsoft or Surface logo appears and the UEFI screen opens.
You should now see the Surface firmware settings.
If your device asks for a UEFI password, you’ll need to enter the correct password before making changes. Contact your IT administrator if the settings are password-protected.
Step 4: Enable PXE Network Boot
Once you’re inside Surface UEFI, locate the Boot Configuration section.
This section controls which devices your Surface can use during startup.
Look for the PXE Network option in the available boot devices.
Make sure PXE Network is enabled. If it’s disabled, use the touchscreen controls to enable it.
You should also check the Enable Alternate Boot Sequence setting and turn it on if necessary.
This setting allows your Surface to start from an alternative boot device, such as a USB drive or Ethernet connection.
Don’t change unrelated firmware settings. Keeping the existing configuration intact helps avoid unnecessary startup or security problems.
Step 5: Configure IPv4 or IPv6 PXE Boot
Your Surface may also provide an option called Enable IPv6 for PXE Network Boot.
This setting determines whether network boot can use IPv6.
If your organization’s PXE deployment server uses IPv4 only, you can leave IPv6 PXE boot disabled.
However, if your network infrastructure supports IPv6 PXE deployment, configure this option according to your IT administrator’s instructions.
For most beginner setups using an IPv4-based deployment environment, there’s no need to enable IPv6.
Make sure the PXE server, DHCP configuration, and network boot environment use compatible network settings.
Step 6: Save the UEFI Settings
After enabling PXE Network and checking the alternate boot settings, save your configuration.
Open the Exit section in Surface UEFI.
Select the available restart option to exit the firmware interface.
Your Surface should now restart with the updated boot configuration.
If you want to make PXE Network the default startup option, you can also move it above Windows Boot Manager in the boot order. However, this isn’t necessary when you only want to perform a one-time network boot.
Step 7: Start Your Surface Using PXE Boot
Now comes the important part: starting your Surface from the network.
There are two ways to do this.
The first method is to use the alternate boot shortcut.
Shut down your Surface completely. Press and hold the Volume Down button, then press and release the Power button.
Continue holding Volume Down until the device begins booting from the connected Ethernet adapter. Release the button once network boot starts.
Alternatively, enter Surface UEFI again and open Boot Configuration.
Find the PXE Network option and swipe left on it using the touchscreen.
You should see an option to boot from that device immediately. Confirm the selection.
Your Surface should now attempt to contact the PXE server through the wired network connection.
Step 8: Complete the Network Deployment
If everything is configured correctly, your Surface should communicate with the PXE server and receive the appropriate network boot files.
Depending on your organization’s deployment setup, you may see a Windows Preinstallation Environment (WinPE) screen or a deployment wizard.
Connect a keyboard to your Surface if needed to navigate the deployment environment.
Follow the instructions provided by your organization’s deployment solution. You may need to select a Windows installation image, enter deployment credentials, or choose an available operating system deployment task.
Once you’ve selected the appropriate deployment option, allow the installation process to finish.
Important: Some deployment processes erase existing files and applications. Make sure important data is backed up before proceeding.
FAQs
1. Does Microsoft Surface Pro for Business 12-inch support PXE boot?
Surface Pro for Business 12-inch models have Surface UEFI support. PXE boot requires a compatible Ethernet adapter or docking station and a properly configured network deployment environment.
2. Can I PXE boot my Surface using Wi-Fi?
No. Surface PXE boot requires a supported wired Ethernet connection. A normal Wi-Fi connection cannot replace the firmware-compatible Ethernet connection.
3. Why is PXE Network missing in Surface UEFI?
This can happen when the Ethernet adapter isn’t supported for firmware-level network boot, the docking station isn’t recognized, or the relevant boot configuration is disabled. Try a Microsoft-supported Ethernet adapter and check for firmware updates.
4. Do I need to disable Secure Boot for PXE boot?
Not necessarily. You should generally keep Secure Boot enabled unless your organization’s deployment requirements specifically require a different configuration. Don’t disable security features without checking with your IT administrator.
5. What should I do if PXE boot fails?
Check your Ethernet connection, adapter compatibility, UEFI boot settings, and PXE server configuration. Also confirm that DHCP and the deployment server are correctly configured to provide network boot services.
Summary
Setting up a Microsoft Surface Pro for Business 12-inch for PXE boot is relatively straightforward once you understand the UEFI settings and networking requirements.
Start by connecting a supported Ethernet adapter, accessing Surface UEFI, enabling PXE Network, and configuring the alternate boot sequence. After that, use the Volume Down and Power button combination or the UEFI boot menu to start network boot.
Finally, make sure your organization’s PXE server is properly configured to deliver the required Windows deployment files.
With these settings in place, you can use network-based Windows installation and deployment without relying on a traditional USB installation drive.
